Resinflex cushion

 

COMPOSITION: The resin flex Cushion is an overlay system of old and new asphalt with moderate elasticity and damping vibration.

Made from a mixture of acrylic resin in dispersion with inert mineral admixtures and grainrubber powder (in the first layer) is a beautiful color scheme for surface land in intensive use. Product of industrial technology, mainly from acrylic resins and excellent purity inertmineral admixtures, gives a high-level mix.

USAGE: Available mainly for tennis, basketball, volleyball, handball, corridors, playgrounds and  indoor- sport

APPEARANCE: Anti-reflection, rough, slip-resistant, uniform, with no grout.

APPLICATION: With rubber spatula 60-90 cm (rakleta).

HARDENING: 30 minutes to an hour. It depends on the temperature and humidity. Does not freeze, it is not flammable, does not fade.

THICKNESS: 2,5 -3,5 mm.

APPLICATION resin flex  is used in hard floors, structured as follows.

FORMAT: Flattening of  the natural soil, preferably with excavation, creating the same slope as the final playing surface. It shouldn’t present any  areas that retain moisture (puddles),but it should drain the water.

SUBBASE: Α level layer of gravel pavement (3A), about 10 cm thick ,well compacted . An even level of asphalt coating, closed type 5-7 cm thick.

In some cases the sub-base can be constructed from cement

FIRST LAYER

The substrate having been wiped must then be ground and polished with a cold pitchy coating which is applied in successive cross layers. The intermediate layers are enriched with grain from rubber powder.

The aim is to prepare the surface, to fill small potholes and create flexible substrate with little depreciation of vibration. Applied with a rubber spatula (rakleta).

SECOND LAYER (coverage):

The resin flex is  laid in successive cross-layers layer (three minimum) with no grouts and is diluted with water only. In  15o-20o C  hardening  time is 2-3 hours. It is necessary to wait for 8 days before applying on  new  asphalt and 20 or more days before applying on new concrete.

The suitable temperature to apply resinflex is  7o- 35o C

MAINTENANCE: Maintenance is limited to a simple sweeping or washing if it  is very dirty.Generally the natural rainfall is enough to keep a floor clean.

Possible damage from an accident is easily repaired with a filling resin.

ADVANTAGE:

After years of use by using more than two layers resinflex (retoping) and  new lines we can actually have a new carpet at a very low cost

TIME OF APPLICATION:

5-7 days

Posted in Resinflex.