Resinflex soft


COMPOSITION: The resinflex soft is a coating system for new surfaces with high elasticity and vibration damping.

Made from a mixture of acrylic resin in dispersion with inert mineral admixtures (cast in situ in the surface layers) and shockproof substrate grain rubber and polymer-modified emulsion is a beautiful color scheme for land surface requiring a high degree of vibration damping. The combination gives a high level of result.

USAGE: Available mainly for tennis, basketball, volleyball, handball, corridors, playgrounds and sports halls

APPEARANCE: Anti-reflection, rough, slip-resistant, uniform, continuous (without joints).

APPLICATION: With rubber spatula 60-90 cm (rakleta).

Hardening: 30 minutes to an hour. It depends on the temperature and humidity. Does not freeze, it is not inflammable, does not fade.

THICKNESS: 2,5 -3,5 mm.

APPLICATION: resinflex used in hard floors, structured as follows.

FORMAT: Flattening of the natural soil, preferably with excavation, creating the same slope that the ultimate playing surface will have. It mustn’t  have   areas that retain moisture (puddles), but  areas that drain water.

Subbase: leveling layer of gravel pavement (3A), 10 cm thick , well compacted . an even thickness of  asphalt coating  closed type 5-7 cm.

In some cases the sub-base can be constructed from cement (preferred)


After the substrate has been wiped and formatted (if necessary) with a special blend (resurfacer) is laid as a carpet of rubber granules from polymer-modified emulsion thickness 3-4 mm

The aim is to give the system flexibility and a high degree of vibration damping.

SECOND LAYER (coverage):

The resinflex is laid in successive cross-layers (three minimum) without  joints and diluted with water only. In  15-20o C hardening time is 2-3 hours.

It is necessary to wait 8 days before applying on new asphalt  and 20 or more days before applying on new concrete. The proper temperature to apply  resinflex is 7- 35 degrees C.


MAINTENANCE: Maintenance is limited to a simple sweeping or washing if it is very dirty. Generally the natural rainfall is enough to keep the floor clean. Possible damage from an accident is repaired easily.


After years of use by using more than two layers resinflex (retoping) and new lining you will actually have a new floor at a remarkable very low cost

Posted in Resinflex.